205.343.9100 info@HardSteel.net

HS650

Overlay Plate

     HS650 is a unique abrasion resistant chromium-carbide overlay on a mild steel base plate. It is designed for areas with moderate impact and severe abrasion.  This plate can be cut, formed, or rolled.  Our unique overlaying process produces a plate with a surface that is harder, tougher, and more wear resistant than plate made by any other process.  HS650 can be formed or rolled.

HS650 is available in thicknesses from 3/8” to 1”

HS650 must be cut by plasma or abrasive water jet.

Chemistry
Percent (%) 
C
5.27
Mn
2.10
P
0.022
S
0.016
Si
0.50
Cr
26.1/30.0

Mechanical Properties:

 Hardness
 58 to 62 Rockwell C
 Service Temperature
 1000 degrees (F)

Welding Procedures:

HS650 is normally supplied with plasma cut edges and can be welded in place to carbon steel structures with a low hydrogen rod or wire such as E7018 or E8018. No preheating is required. It may be necessary to hardface over the weld with HS101HC wire for added protection.

 

Standard Sizes:

Standard plate size is 60” X 120.” HS650 can be cut to your specific needs. HS650 is available in single, double and triple pass applications in special thicknesses or on special bases upon request.

 

Standard thicknesses are:

 Nominal Thickness  Overlay Thickness  Base Plate Thickness
1/8 on 1/8   1/4″  1/8″ 1/8″
3/16 on 3/16  3/8″  3/16″  3/16″
 1/4 on 1/4  1/2″  1/4″  1/4″
 3/8 on 3/8  3/4″  3/8″  3/8″
 1/2 on 1/2  1″  1/2″  1/2″

 

Suggested Uses for HARDSTEEL HS650 Wear Plate:

Bins & Hoppers
Blast Furnace Handling Equipment
Blades
Blow Tank Plates
Buckets & Components
Bucket Lips
Chip Silo Components
Chipper Hoods & Components
Chutes
Conveyors & Liners
Crusher Components
Cyclones
Dozer Blade Liners
Debarking Drum Components
Drag Conveyors
Drums & Sprockets
Dust Collector Systems
Flights
Fan Blades & Housings
Flatback Elbows
Flume Liners
Hammer Mill Side Liners
Heel Pads
Haul Truck Bed Liners
Hooks
Hot & Cold Stip Mill Guides
Impact Plates
Liner Plates
Log Decks
Mine Cars & Equipment
Sand Systems
Scraper Blades
Screens
Shakeout Machines
Scrap Handling Equipment
Shot Blast Equipment
Skip Cars
Sprockets
Washers
Wear Plates

Let’s Be Social

Get A Quote
Frequently Asked Questions
Custom Solutions

News Topics

Archives

Questions?

11 + 8 =

HardSteel

Physical Address:
702 Bear Creek Cutoff Rd.
Tuscaloosa, AL 35405

Mailing Address:
PO Box 2266
Tuscaloosa, AL 35403

Office: 205.343.9100
Fax: 205.343.0073
info@HardSteel.net