HS Nitronik 30 Stainless Plate
Designed for use in environment with high alkali/acidity and severe wear. HS Nitronik 30 Stainless Steel has a hardness of 350 BHN when installed and will work harden to 500 BHN. HS Nitronik 30 also provides a low coefficient of friction as it compresses during work and develops a very slick surface.
HS Nitronik 30 Stainless Steel Plate is available in thicknesses from 1/4” to 1/2” and can be ground to many finishes.
HS Nitronik 30 Stainless Steel Plate can be cut by gas, abrasive water jet, laser, or plasma.
|
Chemistry
|
%
|
|
C
|
.03 Max
|
|
Mn
|
7.0/9.0
|
|
Si
|
1.0
|
|
Cr
|
15.0/17.0
|
|
Ni
|
1.5
|
Mechanical Properties:
|
Hardness
|
350 BHN
|
|
Yield Strength
|
100 ksi
|
|
Tensile Strength
|
140 ksi
|
Welding Procedures:
Use 309 or 310 stainless rod or wire
Suggested Uses for HS Nitronik 30 Stainless Steel Plate:
|
Bean Dryers & Liners
|
Chutes & Liners
|
Coal Buckets
|
|
Cyclone Liners
|
Downcomer Spout Liners
|
Drag Convey Liners
|
|
Hopper LIners
|
Rail Hopper Cars
|
Rail Unloading Hoppers
|
|
Rock Truck Bed Liners
|
Screens
|
Screen Holders
|
|
Screw Conveyors
|
Skirtboard Liners
|
Trim Boards
|
